This item is built to order. Please allow two business days for assembly. At RWC, we have paired the machining precision of KCNC with Enduro Bearings to bring you the best value BB30 to HT2 adapters without compromising quality. The KCNC design offers several advantages, including optimum bearing placement on the crank set spindle. The double O-ring seals on the "cups" ensure a positive, creak-free fit regardless of BB shell tolerance variations. Because the two halves thread together, when the bottom bracket is properly torqued, it becomes locked into place within the bottom bracket shell. The aluminum body does not flex or distort under load. This also forms a solid barrier from moisture that may be trapped in the bottom bracket shell.

BEARINGS: ENDURO ANGULAR CONTACT "CH" SERIES CERAMIC HYBRID ABEC 5 RATED.

ALLOWS THE USE OF SHIMANO HT2 (DURA ACE, ULTEGRA, 105, ETC.) OUTBOARD CRANK SETS ON FRAMES WITH THE "BB30" STANDARD.

IN PROPERLY ADJUSTED ANGULAR CONTACT (A/C) CARTRIDGE BEARINGS, ALL OF THE BALL BEARINGS ARE ENGAGED AND SPREAD THE FORCE OVER A LARGER SURFACE AREA, DECREASING FRICTION, AND MINIMIZING WEAR. EXCESS PLAY CAN BE ADJUSTED OUT OF THE BOTTOM BRACKET WITHOUT THE USUAL RISK OF SIDE LOADING THE BEARINGS.

-For ROAD BIKE applications
-Not for use on "triple" cranksets
-Auxiliary seals/shields included
-For BB30 standard (42mm BB Shell I.D.)
-for Hollowtech 2 cranksets only--NOT for GXP (SRAM)
-NOT for Cervelo BBRight Bottom Brackets
-Works with Felt F1, F2, Z1 "stepped" carbon BB shells

For road applications, frames with BB30 x 68mm bottom bracket shells can now run HT2 road cranks (Dura Ace, Ultegra, 105, etc.)

Installation:
To properly tighten these threaded bearing cups, two Hollowtech II compatible tools will be required. KCNC recommends tightening the cups to 25 Nm (220 inch-lbs) of torque. Complete installation instructions included with Bottom Bracket